BJKCJ - CARVER TRIPP LIQUID PLASTICLEAR (SUP DATA)

  • MSDS: BJKCJ
  • Manufacturer: PARKS CORP
  • Product Name: CARVER TRIPP LIQUID PLASTICLEAR (SUP DATA)
  • National Stock Number: 8010-00N011328
Product Identification

Product ID:CARVER TRIPP LIQUID PLASTICLEAR (SUP DATA)
MSDS Date:07/16/1987
FSC:8010
NIIN:00N011328
MSDS Number: BJKCJ

Responsible Party
PARKS CORPORATION
MAIN STREET
SOMERSET, MA 02726

Emergency Phone: 508-679-5938;800-225-8543

Info Phone: 508-679-5938;800-225-8543

Cage: 6L244

Contractor
PARKS CORPORATION
5 SOMERSET, MA 02726 US

Telephone: 508-679-5938

Cage: 6L244

Ingredients

MINERAL SPIRITS (PAINT THINNER)

CAS: 64741-41-9

Fraction By Weight: 53%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION.SKIN:DRYING.INGESTION:N/K
.INHALATION:IMPAIRED COORDINATION,RESPIRATORY
IRRITATION,DIZZINESS,WEAKNESS AND NAUSEA.RESPIRATORY TRACT
IRRITATION.CENTRAL NERVOUS SYSTEM DEPRESSI ON IN HIGH
CONCENTRATIONS.
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES:WASH IMMEDIATELY WITH A GENTLE STREAM OF WATER FOR AT
LEAST 15 MINUTES.SEEK MEDICAL HELP.SKIN:WASH WITH MILD SOAP AND
WATER.SEEK MEDICAL ATTENTION.INGESTION:DO NOT INDUCE VOMITING.CALL
A PHYSICIA N IMMEDIATELY.INHALATION:REMOVE TO FRESH AIR.APPLY
ARTIFICIAL RESPIRATION.IF BREATHING STOPS,SEEK IMMEDIATE MEDICAL
ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:101F,38C
Lower Limits:6
Upper Limits:0.8
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM OR WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROT EQUIP
.STRAIGHT WATER STREAM SPREADS HYDROCARBON FIRES.COOL CLSD CONTR W/
WATER.AVOID BREATHING VAPORS.
Unusual Fire/Explosion Hazard:COMBUST LIQ.VAP ACCUM FLASH/EXPLODES IF
IGNITED.CLSD CONTR EXPLODES IN EXTREME HEAT.SOAKED RAGS POSS SPONT
COMBUST.HAZ DECOMP:CO,CO*2,ACROLEIN,NITROGEN OXIDES.

Accidental Release

Spill Release Procedures:EXTINGUISH IGNIT SOURCES.VENT TO PREVENT VAPOR
BUILDUP.TAKE UP LARGE SPILLS W/ INERT MATERIALS
(SAWDUST,SAND,EARTH,CLAY) & SHOVEL INTO CONTR FOR DISPOSAL.PREVENT
RUNOFF TO SEWERS,STREAMS/OTHER BODIES OF WATER.ABSORB SMALL SPILLS
INTO APPROP ABSORB.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:KEEP CONTR CLSD,UPRIGHT WHEN NOT IN
USE.DO NOT TRANSFER TO UNMARKED CONTR.READ ALL WARNING LABELS.STORE
IN COOL,WELL-VENT AREA AWAY FROM HEAT,FLAME.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.SOAKED RAGS SUBJECT TO
SPONTANEOUS COMBUSTION.IF INGESTED DO NOT INDUCE VOMITING.CALL A
PHYSICIAN IMMEDIATELY.AVOID EYE CONTACT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:IF NEEDED TO AVOID SKIN CONTACT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH AND SAFETY SHOWER.RUBBER SHOES OR
BOOTS,COVERALLS AND/OR RUBBER APRON.
Work Hygienic Practices:N/K
Supplemental Safety and Health
PART NO:SATIN FINISH POLYURETHANE.BP RANGE:310-411F,154-211C.ROUTES OF
ENTRY:INHALATION/SKIN/INGESTION .

Chemical Properties

Boiling Pt:B.P. Text:SEE SUPP
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:0.8-5 MMHG
Vapor Density:>1 (AIR=1)
Spec Gravity:0.90 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR,TRANSLUCENT,THIN LIQUID;MILD ODOR;AMBER
COLOR.
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT,SPARKS,FLAME AND OTHER SOURCES
OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE AND
POSSIBLY ACROLEIN AND OXIDES OF NITROGEN WHEN THERMALLY DECOMPOSED.
Conditions to Avoid Polymerization:STRONG OXIDIZING AGENTS.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DISCARD IN SEALED METAL
CONTAINER IN ACCORDANCE WITH LOCAL REGULATIONS.SOAK CLEANUP RAGS IN
WATER TO AVOID SPONTANEOUS CO MBUSTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.